AV150 – Virtex® UltraScale+™
Présentation de la carte AV150 VPX, pour les applications à haute résolution et à usage général
Aperçu du produit
L’AV150 est un composant de notre gamme de solutions de conversion de données et de traitement du signal à haut débit, qui adhèrent à la norme VITA 47, VPX.
Entièrement conforme à la norme OpenVPX, l’AV150 prend en charge une variété de protocoles de communication, notamment PCIe, Gigabit Ethernet et Aurora, ainsi qu’un grand nombre d’E/S définies par l’utilisateur.
L’AV150 combine quatre CAN 14 bits 3 Gsps et quatre DAC 16 bits 6/12 Gsps avec une puissance de traitement ultra-élevée fournie par un FPGA AMD Virtex® Ultrascale+ ™ (VU7P/VU9P/VU13P).
Les FPGA AMD Virtex® UltraScale+ ™ offrent les meilleures performances et capacités d’intégration dans un nœud FinFET 14 nm/16 nm. De plus, ils offrent la bande passante d’émetteur-récepteur la plus élevée, le nombre de DSP le plus élevé et la mémoire sur puce et dans le boîtier la plus élevée disponible dans l’architecture UltraScale™. Les FPGA Virtex® UltraScale+ ™ offrent également de nombreuses options d’alimentation qui offrent un équilibre optimal entre les performances système requises et la plus petite enveloppe d’alimentation.
Les marchés cibles de cette carte AV150 VPX comprennent l’émetteur/récepteur radar à réseau phasé, la guerre électronique ESM /ECM, MIMO et la communication à large bande.
Avantages clés
- 4 channels 3 Gsps 14-bit ADC
- Independent Digital Down Converters, decimation factor 2 to 48
- 4 channels 6/12 Gsps 16-bit DAC
- Independent Digital Up Converters, interpolation 2 to 24
- One Ultra Low jitter clock synthesizers
- External or internal sampling clock
- External and internal sampling clock reference
- User programmable AMD Virtex® Ultrascale+™ VU7P/VU9P/VU13P FPGA
- 2x 1G64 DDR4-2666 SDRAM
- 3U OpenVPX standard compliant
- Air cooled and Conduction cooled versions
Featuring an internal ultra-low jitter reference and a clock synthesizer, the AV150 offers versatility by allowing the use of either external clock or external reference for increased flexibility.
The AV150 includes one AMD Virtex® Ultrascale+™ FPGA (VU7P/VU9P/VU13P). Within a 14 nm/16 nm FinFET node, AMD Virtex® UltraScale+™ FPGAs stand out for their exceptional performance and integration capabilities. They boast the highest transceiver bandwidth, DSP count, and on-chip/in-package memory within the UltraScale™ architecture. Moreover, Virtex® UltraScale+™ FPGAs offer a range of power options, allowing for an optimal balance between system performance requirements and power consumption constraints.
Equipped with a USB 2.0 interface designed for system monitoring and supervision, the AV150 offers comprehensive software drivers for both Windows and Linux platforms. Additionally, it includes an FPGA Development Kit containing all essential cores required to construct user FPGA applications.
Schémas
Specs techniques
Analog Inputs/Outputs
- Input coupling: AC
- Full power bandwidth: > 10MHz to 8 GHz
- Full scale : 6 dBm TBD
- Output coupling: AC
- Full power 10MHz to 7.5 GHz
- Full scale : 0 dBm TBD
- Impedance: 50 Ohm
- Connectors: SMPM
Analog-Digital Conversion
- Four channels, Fs ≤ 3 GHz
- Resolution: 14 bit
- Sampling Performances @2.1 GHz -10dBFS
- SNR: 55 dBFS @2.1 GHz
- SFDR: 60 dBc @2.1 GHz
- ENOB: 8.5 bit @2.1 GHz
Digital-Analog Conversion
- Four channels, Fs ≤ 6 GHz
- (12 GHz DAC update rate)
- Resolution: 16 bits
- Sampling Performances @2 GHz 5 Gsps
- SFDR: 68 dBc (0dBFS)
- NSD: -155 dBm/Hz
Clock
- Internal:
- One ultra-low jitter clock synthesizers, 2 GHz to 6 GHz low jitter clock
- External Input Clock:
- Frequency: 10 MHz to 100 MHz
- Input level: 10 dBm recommended
- Connector: SMPM 50 Ohms
- External reference:
- frequency: 10 MHz to 100 MHz
- Connector: SMPM, 50 Ohm and VPX P2
Digital Down Converter
- 2 independent DDC for each ADC:
- Tuning frequency step: 48-bit NCO DDC with 1/2 to 1/48 decimation ratio
Digital Up Converter
- 1 DUC for each DAC:
- Tuning frequency step: 48-bit NCO DUC with 2x to 24x interpolation ratio
FPGA
- FPGA: Xilinx Virtex Ultrascale+
- XCVU7P-2FLVB2104I
- XCVU9P-2FLGB2104I
- XCVU13P-2FHGB2104I
Memory
- Two banks 1G64 DDR4 2666 SDRAM
- One 2 Gbit QSPI FLASH memory
Software support
- Software Drivers:
- Windows 10 64-bits
- Linux 64-bits
- Application example: Windows and Linux
Firmware support
- VHDL cores for all hardware resources
- Base design
- Supported by Xilinx VIVADO 2022.2
Operating Temperature
- Air-cooled EAC4, 0°C to 55°C
- Conduction-cooled ECC3, -40°C to 70°C
Power dissipation (VU13P)
- +12V: 11.4 A max (137W) TBD
- +3.3VAUX: 0.6 A max (2W) TBD
Weight
- Air cooled : 550g TBD
- Conduction cooled : 650gTBD
VPX interface
- P1:
- Data plane: two fat pipes
- Expansion plane: one fat pipe
- Control plane: 2 ultra-thin pipes
- 2 user-defined ultra-thin pipes
- P2:
- USB2.0 and USB to UART
- 24 LVDS differential pairs, configurable as 48 single ended LVCMOS
Livrables
| Part Number | AV150 | c | a | b | |
|---|---|---|---|---|---|
| Cooling | Air Conduction | - - | A C | - - | - - |
| FPGA | FPGA Virtex Ultrascale+ VU7P FPGA Virtex Ultrascale+ VU9P FPGA Virtex Ultrascale+ VU13P | - - - | - - - | 7 9 13 | - - - |
Availability: September 2024
Ruggedization
| Environmental | Air-cooled Vita 47 class EAC4 | Conduction-cooled Vita 47 class ECC3 |
| Operating Temperature | 0°C to 55C (8 CFM airflow at sea level) | -40°C to +70°C (Card Edge) |
| Non Operating Temperature | -40°C to +85°C | -50°C to +100°C |
| Operating Vibration (Random) | 5Hz - 100Hz +3 dB/octave 100Hz - 1kHz = 0.04 g2/Hz 1kHz - 2kHz -6 dB/octave | 5Hz - 100Hz +3 dB/octave 100Hz - 1kHz = 0.01g2/Hz 1kHz - 2kHz -6 dB/octave |
| Operating Shock | 20g, 11 millisecond, half-sine | 40g, 11 millisecond, half-sine |
| Operating Relative Humidity | 0% to 95% non-condensing | 0% to 95% non-condensing |
| Operating Attitude | 0 to 10’000 ft with adequate airflow | -1,500 to 60,000 ft |
ECCN
ECCN number: 3A002h1