Zeus SoM

Presentation of the Zeus Zynq UltraScale+ module

Zeus SoM
bottom picture of the Zeus module
Zeus module heatspreader
Zeus SoM
bottom picture of the Zeus module
Zeus module heatspreader

Product overview

The Zeus Zynq® UltraScale+™ MPSoC is a system-on-module, based on the AMD ZU11EG/ZU19EG Zynq® UltraScale+™ MPSoC FPGA.

With an innovative ARM® + FPGA architecture, the Zynq® Ultrascale+™ FPGA is smarter and optimized for differentiation, analytics and control. Its large portfolio of SW and HW design tools and reference designs enables you to easily develop any project. The MPSoC UltraScale+™ FPGA provides multiprocessing capabilities, because the MPSoC (microprocessor system-on-chip) is an SoC that includes multiple microprocessors. MPSoCs usually target embedded applications.

Target markets of this Zynq® UltraScale+™ module include software defined radio, radar systems, electronic warfare, high-precision measurement, and much more.

The Zeus Zynq® UltraScale+™ module is fully compatible with the carrier board : Zeus Zynq® UltraScale+™ board.

Benefits & features

  • Zynq® UltraScale+™ MPSoC ZU11EG/ZU19EG
  • PCIe Gen2 x4 Root Complex
  • PCIe Gen3 x16 End Point
  • Quad-Core ARM Cortex-A53
  • 304 SE IOs total (96 LVDS)
  • 16 GTY @25.78Gbps (Top side)
  • 32 GTH @12.5Gbps (Bot side)
  • 3x DDR4 banks, 16GByte Total
  • Industrial Temp Grade
  • Long Term Supply
  • Designed for High Precision Measurement, Artifical Intelligence, Radar Systems, Software Defined Radio and "Customizable" markets

 

The Zynq® UltraScale+™ MPSoC family is based on AMD UltraScale™ MPSoC architecture. This family of products integrates a 64-bit quad-core A53 and dual-core ARM Cortex-R5 processing system (PS) and AMD programmable logic (PL) UltraScale architecture in a single device.

The Zynq® Ultrascale+™ MPsoC FPGA was chosen for its unmatched performance, as well as its lower system power architecture.

REFLEX CES included numerous essential components for an embedded board, developed for this FPGA: DDR4 memories, connectors, BMC, etc., and a customized software environment.

Our Zynq® UltraScale+™ module is specially designed for customer needs. Our sales team is available to advise you on the best solution according to your needs, at sales@reflexces.com

Diagrams

Block diagram of the Zynq UltraScale+ module:

Bloc diagram of the Zeus SoM

Tech specs

Features Zeus Zynq® UltraScale+™ MPSoC
FPGA SoC FPGA speed grade 1, Industrial Temp Range
Quad-core ARM Cortex-A53 MPCore @1.2GHz
Dual-core ARM Cortex-R5 MPCore @500MHz
Mali™-400 MP2 @600MHzZeus Indus ZU11EG : XCZU11EG-1FFVC1760I device
Programmable Logic 653 KLC
Total Block RAM 21.1MB, UltraRAM 22.5Mb, 2928 DSP Slices
Zeus Indus ZU19EG : XCZU19EG-1FFVC1760I device
Programmable Logic 1143 KLC
Total Block RAM 34.6MB, UltraRAM 36.0Mb, 1968 DSP Slices
DDR4 Memory PL= 2 banks 4GByte each @2400MT/s, x32bit
PS= 1 bank 8GByte @2400 MT/s, x64bit + x8bit ECC
PS Communication & Networking 10/100/1000 Base-T Ethernet RGMII
43x MIO configurable for interface like: NAND flash, eMMC or SD card, ETH RGMII, USB, SPI, I2C, UART, GPIO
Top Connectors High Speed Accelerate connectors (GTY) 4x 4 serial transceivers channel (RX and TX) @25.78Gbps
(Existing cable adapter to QSFP+ and SFP+ connectors)
Bottom Connectors Processor (PS) Mezzanine connector 4x serial transceivers channel (RX and TX) @6Gbps
PCIe Gen2 x4 Root Complex capable
43x MIO
GTH Mezzanine connector 32x serial transceivers channel (RX and TX) @12.5Gbps
PCIe Gen3 x16 End Point capable
HP Mezzanine connectors 208x HP I/O high speed up to 1260 Mb/s, designed for high speed chip-to-chip interfaces with voltages up to 1.8V
96x LVDS capability
HD Mezzanine connector 96x HD I/O low speed up to 250 Mb/s, designed to support low speed interfaces with voltages 3.3V, 2.5V, 1.8V, 1.2V
FPGA
Configuration
JTAG available on Processor (PS) Mezzanine connector
Quad SPI
1Gbit NOR Flash for non-volatile storage, remote upgrade and failsafe configuration
Software Configuration 128GByte NAND Flash eMMC (Stores U-Boot, Linux Kernel, and RootFS)
Mechanical & Environmental Specification Module rugged for shocks and high vibration
IEC/EN61000 (EMI immunity), EN61000 + EN55032 (EMI emission),
EN60068 (Vibration: sinusoidal, 10Hz - 2KHz, +/- 0.15mm, 2g ; Shock: half-sinusoidal, 11ms, 15g)
5-15V Power Input
Industrial temperature grade -40°C to +85°C
Conformal coating (option on request)
Power & Dissipation Zeus Indus ZU11EG : 70W max, active heatsink (heat spreader + heatsink + fan)
Zeus Indus ZU19EG : under definition
Board Management Controller Communication with Carrier board: I2C, UART, SMBus
Communication with FPGA : 1x UART to PL, 1x UART to PS
Monitoring : Current, voltages, temperature, ID information
Programming : Clock, QSPI FPGA, QSPI BMC
Control: Power, temperature protection, Fans
Module dimensions 107mm x 85mm (4 x 3.4 inches) / 12mm thickness (38.6mm with active heatsink and heat spreader)
Deliverables Zeus Zynq® UltraScale+™ MPSoC module
Active heatsink with heat spreader
Ordering Information Zeus Indus ZU11EG : RXCZUP11EGPF42-SOM01I
Zeus Indus ZU19EG: RXCZUP19EGPF42-SOM01I – available July 2023

Videos

Zeus Zynq® UltraScale+™ MPSoC System-on-Module from REFLEX CES:

UNBOXING your REFLEX CES Zeus Zynq® UltraScale+™ MPSoC System-on-Module:

Deliverables

Deliverables for the purchase of a System-on-Module:

  • Zeus Zynq® UltraScale+™ MPSoC module
  • Active heatsink with heat spreader

 

Ordering information

Zeus Indus ZU11EG : RXCZUP11EGPF42-SOM01I
Zeus Indus ZU19EG: RXCZUP19EGPF42-SOM01I – available July 2023

 

The Zeus Zynq UltraScale+ board is sold separately

Ordering information : RXCZUP-CBD0SA

The following deliverables are only included with the purchase of a Zynq UltraScale+ carrier board :

  • Power supply and cables (US, UK, EU, JP), micro-USB cable
  • Board Support Package (to download from our online technical support):
    • Starter Guide, Module and carrier board Reference Manuals
    • HDL Test Designs by interface (Vivado 2020.2 version)
    • 100G Ethernet MAC HDL test design
    • Linux Kernel & Linaro optimized distribution, U-boot bootloader, Test scripts
    • Mechanical drawings, assembly files
    • Interconnect pinout file
    • Carrier board schematics, Carrier board Design Guide
    • On request: 3D step files on the module and its carrier board, Carrier board gerber files, carrier board BOM & PCB specification, S-parameters
  • 1-year technical support
  • 1-year warrantee
  • Online support at support.reflexces.com

Related products

1/ Zeus Zynq® UltraScale+™ carrier board

  • The Zeus Carrier board is sold separately
  • Ordering information: RXCZUP-CBD0SA
  • Dimensions: 170mm x 233.35mm

The following deliverables are only included with the purchase of a carrier board :

  • Power supply and cables (US, UK, EU, JP), micro-USB cable
  • Board Support Package (to download from our online technical support):
    • Starter Guide, Module and carrier board Reference Manuals
    • HDL Test Designs by interface (Vivado 2020.2 version)
    • Linux Kernel & Linaro optimized distribution, U-boot bootloader, Test scripts
    • Mechanical drawings, assembly files
    • Interconnect pinout file
    • Carrier board schematics, Carrier board Design Guide
    • On request: 3D step files on the module and its carrier board, Carrier board gerber files, carrier board BOM & PCB specification, S-parameters
  •  1-year technical support
  • 1-year warrantee
  • Online support at support.reflexces.com

 

2/ Zeus GTY-QSFP28 eval board

  • The Zeus GTY-QSFP28 eval board is sold separately
  • Compatible with the Zeus carrier board
  • 2x Zeus GTY-QSFP28 cables are included in the Zeus GTY-QSFP28 eval board
  • Ordering information: Zeus GTY-QSFP28 eval board

Connectors

  • 2x QSFP28 (up to 100Gbps per connector)
  • 2x Zeus GTY-QSFP28 cables with ARC6 connectors, 12 inches length
  • 1x Clock generator
    • 3 outputs towards FMC connector (Clk0, CLk1, GBTCLK0)
    • 3 inputs (SMA connector, 25Mhz local Quartz, Clk2_Bidir from FMC)

Misc: 1x E2PROM

FMC dimensions: 69mm x 72.3mm

3/ Zeus GTY-QSFP28 Cable

  • 2x Zeus GTY-QSFP28 cables are included in the Zeus GTY-QSFP28 eval board
  • The Zeus GTY-QSFP28 cable is sold separately with an MOQ (15)
  • To be used for Customer custom carrier board
  • 12 inches ARC6 custom cable
  • Uses the Samtec Flyover® Technology
  • Connects GTY connector to QSFP-28 connector
  • Ordering information: Zeus GTY-QSFP28 Cable

Export control ECCN

ECCN Number : 3A991

CECC (commodity Export Classification Certificate) : Download certificate

Related products

Keep me informed

If you want to know more about reflex ces, sign up for our newsletter to be updated on our initiatives, sectorial news and upcoming events.