XpressGXA10-LP1151

Diagrams

Tech spec

FPGA and Configuration Modules

• Intel® Arria® 10 GX 20nm FPGA : 10AX115N2F40I1SG
• EPCQL1024 for Active Serial (AS) configuration mode (2 sector for fail safe feature)

Communication Interfaces

• PCI Express x8 (Gen 1, 2 or 3)
• QSFP+ quad optical cage (4 XCVR:10.3125 Gb/s per link)
  • 10GbE/40GbE networking interface
  • Other protocols supported by the QSFP module

Memory

• 1 bank on board 8GB DDR4, 72bit (ECC), up to 2400 MT/s
• Flash = Configuration via Protocol (CvP) allowing to improve the PCIe access and allows the software to load an external image in the FPGA

Power

• External auxiliary connector (12V)
• Max 80W
• Single slot passive heat-sink

Operating Range

• 0°C to 70°C

Other resources

• 10 transceivers (Rx/Tx) LVCMOS/LVDS expansion port with board-to-board connection over SAMTEC LSHM connector (LSHM-150-01-F-DH-A-S-K-TR)
• 10 LVCMOS GPIO connector, SPI
• Programmable PLL oscillator (Si5341) controlled via the FPGA through an I²C serial interface, or via the BMC
• USB Blaster on board
• High precision oscillator clock accuracy 20MHz-0.05ppm for Precision Time Protocol (PTP) IEEE 1588
• One coax connector for PPS (pulse per second) for synchronisation of multiple electronics parts
• Board Management Controller (BMC) = monitoring, EPCQ and clock programmation, updates and IPMI features

Board Dimensions

• Length : 167.7mm (6.59inches)
• Height : 68.9mm (2.71 inches) / Low Profile PCIe
• Thickness : 1.57 mm (0.062 inches) / Standard Thickness PCIe

Standards and compliance

• RoHS/REACH compliant
• UL certified
• ISO9001 Facility

Videos

Deliverables

Deliverables

• Low-profile (half-height) form factor PCIe Board
• Board Support Package (Manuals, Test Designs)
• Power Supply adapter cable for standard ATX connector
• PCIe Low profile or standart bracket
• Mechanical files (3D DWF/STEP models and 2D drawings (upon request)
• Optional = OpenCL BSP for HPC, QDR, 10G MAC

Ordering information

Basic = XpressGXA10-LP1151B : Intel® Arria® 10 GX 10AX115N2F40I1SG, 8GB DDR4