PCIe Carrier Board Arria® 10 SoC SoM

Tech spec

Configuration & Monitoring : Arria® 10 SoC SoM + PCIe Carrier board

• Onboard USB Blaster JTAG configuration circuitry to enable FPGA configuration over USB connector.
• One µUSB connector allows interfacing UART bus and communicate with the MAX 10 and the HPS FPGA.
• One connector for connecting a Linear Powerplay DC1613A USB cable
  PMBus interface : Digital Power System management is ready, configure and interrogate the PSM Devices with LTpowerPlay

Communication Interfaces : Arria® 10 SoC SoM + PCIe Carrier board

• PCI Express x8 2.5/5.0/8.0 Gbps (Gen 1, 2 or 3) on PCI Express edge connector
• 1x QSFP+ quad optical cage (4 XCVR:10.3125 Gb/s per link)
• 2x SFP+ single optical cage (2 XCVR : 10.3125 Gb/s per link)
• 2x Ethernet 10/100/1000 Base-T (HPS)
• 1x USB3.0 Micro B (FPGA)
• 1x USB OTG Mini AB (HPS)
• Atmel Wifi 802.11 b/g/n IoT (Internet of Things) module which is specifically optimized for low power IoT applications. Module provides SPI and SDIO to interface to host controller.
• One 1x10pts connector for connecting an LCD

Board Size : Arria® 10 SoC SoM + PCIe Carrier board

• Standard height ( 111.15 mm / 4.376 inches) x Half length ( 167.65 mm / 6.600 inches) / Fan on top for SoMA10
• Fan on top for Starter Kit evaluation mode

Power

• Evaluation mode on desk with AC power supply (AC power supply  not included)
• or can be inserted into a PCIe slot and used as a PCIe card

Standards and compliance

• RoHS/REACH compliant
• UL certified
• ISO9001 Facility

Deliverables

Deliverables

• PCIe carrier board for Arria® 10 SoC SoM
• Mandatory to purchase an Achilles Development Kit for deliverables

Ordering information

• PCIe Carrier Board Arria® 10 SoC SoM // RXCA10S0000F34-FHP0SA