Sargon Stratix® 10 GX FMC+ DevKit

Diagrams

Tech spec

FPGA

• Intel® Stratix® 10 GX 2800 KLEs
• PCIe Gen3 x16

Board Programming

• Max10 USB Blaster on board, UART over USB interface
• 1x Nor Flash 1GB quad SPI FPGA AS configuration
• 1x Nor Flash 1GB for configuration mode ST8
• Board Management Controller (BMC) for monitoring, NOR Flash and clock programming

Memory

• 2x banks DDR4 vertical RDIMM, 16GBytes each (32GBytes capable), x72bit, up to 2400MT/s. The RDIMMs are not provided.
• 1x bank DDR4 soldered on PCB, bus x72, 8GBytes up to 2400MT/s (HPS bank mutual with FPGA)

Communication & Interfaces

• 2x FireFly™ Samtec quad connector (28Gb/s each XCVR) - 1 FireFly™ connected to 100G IP
• 1x FMC+ (VITA57.4) with 24 XCVR, 20 XCVR up to 28Gb/s, 4 XCVR up to 17.4Gb/s, 2x Hard IP 100G transceivers blocks capable
• MiniSAS quad connector (1 HD SAS, 4 SATA HDD, NVMe interface capable)
• GPIO extension connector : 9 LVDS usable as 18 LVCMOS
• XCVR extension connector : 10 XCVR, 8 LVDS, Clock In&Out
• 48 dedicated HPS IO connector (daughter board for SX)
• 1x Ethernet SGMII interface (to FPGA), Marvel PHY 88E11

Clock Circuitry

• Programmable PLL oscillator (Si5341), output clocks frequency between 0.0001 MHz to 750 MHz
• High precision oscillator, clock accuracy 20MHz- 0.01ppm for Precision Time Protocol (PTP) IEEE 1588
• One coax connector for PPS (pulse per second)

Board Size

• Length : 254 mm (10 inches)
• Height : 111.15 mm (4.38 inches) / Standard Height PCIe
• Dual slot PCIe

Power : Max 240W including FMC board, delivered with active heat-sink

Operating Range : 0°C to 40°C

Storage Temp Range : 0°C to 70°C

Videos

REFLEX CES Stratix® 10 Development Kit demo featuring Samtec 14Gbps FireFly™ FMC board :

REFLEX CES Stratix® 10 Development Kit demo featuring Samtec 14Gbps FireFly™ FMC board, at Electronica 2018 tradeshow :

REFLEX CES Stratix® 10 standard PCIe boards comparison :

UNBOXING your REFLEX CES Sargon Stratix® 10 FPGA FMC+ Development Kit :

REFLEX CES Stratix® 10 Development Kit demo featuring Samtec 28Gbps FireFly™ FMC+ board :

Samtec presents the Embedded Optical Development Platform For FMC+, a video from SC19 :

Deliverables

Deliverables

• Sargon Stratix® 10 GX FMC+ DevKit
• Power adapter (US, UK, EU, JP) and Micro USB2.0 cable
• PDF Documentation (Starter Guide, Hardware Reference Manual)
• FMC Interface Control Excel sheet
• Board test design files available under FTP after the creation of a user account (Quartus Prime Pro software required)
• Under request on the online support support.reflexces.com :
  • Quartus Prime Pro DKE
  • Mechanical files (DWF/STEP models and 2D drawing)

Kit Ordering Information

RXCS10X280HPF50-IDK10A                           //                       Development Kit, Intel® Stratix® 10 GX, H-Tile version (1SG280HU1F50E2VG)