Ares SoM
Presentation of the Ares Agilex™ 7 FPGA SoC F-Series module
Product overview
The Ares SoM is an Agilex™ SoC F-Series system-on-module, based on the Intel® Agilex™ 7 FPGA SoC F-Series FPGA. The main advantage of the Agilex™ 7 SoC F-Series FPGA is its flexibility and high-performance capabilities, enabling designers to efficiently implement complex algorithms and integrate multiple functions onto a single chip, resulting in reduced power consumption, and improved system performance and technology.
The system-on-module (module SoM) is delivered with an active heatsink with heat spreader and fan, and is specifically optimized for embedded applications. Using a module for an embedded system can simplify the design process and reduce time-to-market by providing pre-built, tested components that can be easily integrated into your system.
Target markets of this Agilex™ SoC F-Series module include Bioscience, High Precision Measurement, Radar Systems, Electronic Warfare, Satellite Communication, and much more.
The Ares Agilex™ SoC F-Series module will be fully compatible its the carrier board (available soon).
Benefits & features
- Intel® Agilex™ 7 FPGA SoC F-Series
- AGF012
- PCIe Gen4 x4 Root Complex
- PCIe Gen4 x16 End Point
- Quad-Core ARM Cortex A-53
- 84x LVDS + 138 FPGA GPIOs
- 32 transceivers @32Gbps NRZ OR up to 24 transceivers @58Gbps PAM4
- Industrial Temp Grade
- Long Term Supply
- Designed for Bioscience, High Precision Measurement, Radar Systems, Electronic Warfare, Satellite Communication and "Customizable" markets
This module offers an Intel® Agilex™ 7 SoC F-Series FPGA technology.
Intel® Agilex™ F-Series devices are general-purpose FPGAs built on Intel 10 nm SuperFin process technology. The Intel® Agilex™ 7 SoC F-Series FPGA is part of the Agilex™ SoC family.
FPGAs (field programmable gate arrays) like Agilex™ SoC F-Series module and Agilex™ FPGA are used to offer high-capacity logic and memory storage.
Programmable logic and accelerator technologies such as Agilex™ FPGA chips can improve system performance while reducing power consumption. These accelerators can be programmed using embedded programming languages and integrated into the system design using industry-standard interfaces.
FPGA chips, including Agilex™ FPGA device, can be programmed using embedded programming languages such as VHDL or Verilog, and can be integrated into the system design using industry-standard interfaces such as PCI Express (PCIe = Peripheral Component Interconnect Express). They can be used to perform tasks such as image processing, data compression, and encryption more quickly and with less power consumption than a traditional processor.
The system-on-chip (SoC) is an integrated circuit inside the FPGA, most often a CPU (central processing unit) processor and supporting peripherals, that provides more flexibility and integration, and allows the FPGA to better control the board.
reflex ces included numerous essential components for an embedded board, developed for this intel agilex FPGA: PCB (Printed Circuit Board), transceivers, power supply, JTAG, DDR4, Flash eMMC memory, BMC (Baseboard Management Controller), and more.
Embedded programming is an essential part of developing embedded systems. Our designers carefully consider the architecture of the FPGA chip and the system design to ensure that the accelerator is correctly integrated into the system. They also consider the programming and debugging tools available for the FPGA chip, such as Intel Agilex™, to ensure efficient development and testing.
Reduce time to market of your next embedded project with our Agilex™ 7 FPGA SoC module, Agilex™ FPGA SoC board, using the Intel® Quartus Prime development tools. We draw on our firmware, hardware and software skills, and full documentation package and reference designs to create our boards.
The Intel® Agilex™ 7 FPGA SoC board is RoHS (Restriction of Hazardous Substances) and REACH (Registration, Evaluation, Authorization, and Restriction of Chemicals) standard compliant.
Our designers always keep the industry standard and footprint in mind when developing embedded systems. Standard interfaces and architectures, ensure that the card and the system can be efficiently integrated into the larger ecosystem. The footprint of the system is also carefully considered, ensuring that it fits within the size constraints of the final product. With these considerations in mind, they create efficient and effective embedded systems that are ready to market.
Our Ares Agilex™ 7 FPGA SoC F-Series system-on-module, Intel Agilex™ FPGA device, and Agilex™ SoC is specially designed for customer needs. Our sales team is available to advise you on the best solution according to your needs and product specifications, at sales@reflexces.com
Diagrams
Block diagram of the Ares Agilex™ 7 FPGA SoC F-Series module:
Tech specs
| Features | Ares Agilex™ 7 FPGA SoC F-Series | |
| FPGA SoC | Agilex™ 7 FPGA SoC F-Series AGF012, AGFB012R24C2I2V, R24C package 1178 KLE, M20K 110Mbit, 3743 DSP Blocks Quad Core Arm Cortex-A53 up to 1.43GHz Transceiver speed grade 2, Core speed grade 2 Industrial Temp Grade |
|
| DDR4 Memory | 3 banks DDR4, 24 GByte total | HPS= 1 bank DDR4 x72bit bus, 8GByte, @2666MT/s |
| FPGA= 2 banks DDR4 x72bit bus, 8GByte each, @2666MT/s | ||
| Connectors | Transceiver Mezzanine Connector | 32 transceivers @32Gbps NRZ OR up to 24 transceivers @58Gbps PAM4 (example: 16 transceivers @32Gbps NRZ + 16 @58Gbps PAM4) |
| IO Mezzanine Connector | LVDS = 42 RX pairs and 42 TX pairs @1400Mbps FPGA GPIOs = 138 HPS IO = depending used interfaces |
|
| FPGA Configuration | 2Gbit Quad SPI Flash (store up to 2 images) | |
| Software Configuration | 128Gbyte NAND Flash eMMC (Stores U-Boot, Linux Kernel, and RootFS) + SD Card support on the carrier board |
|
| HPS Communication | 1GbE RGMII, I2C, UART, USB 2.0 OTG, SPI slave and master, HPS IO | |
| Mechanical & Environmental Specification | Module rugged for shocks and high vibration IEC/EN61000 (EMI immunity), EN61000 + EN55032 (EMI emission), EN60068 (Vibration: sinusoidal, 10Hz - 2KHz, +/- 0.15mm, 2g ; Shock: half-sinusoidal, 11ms, 15g) 5-15V Power Input Industrial temperature grade -40°C to +70°C (to be qualified) Conformal coating (option on request) |
|
| Power & Dissipation | Typ 113W, active airflow cooling (heat spreader + heatsink + fan) fan noise < 50dB |
|
| Board Management Controller | Communication with Carrier board: I2C, PWM, JTAG Communication with FPGA : 1x UART to FPGA Monitoring : Current, voltages, temperature, ID information Programming : Clock Control: Power, temperature protection, Fans |
|
| Module dimensions | TBC: 107mm x 85mm (4.2 x 3.4 inches) / 12mm+ thickness (38.6mm with active heatsink and heat spreader) | |
| Deliverables | • Ares module & its active heatsink system • Board Support Package (to download from our online technical support) after purchase of a module and its carrier board: Starter Guide, module and carrier board Reference Manuals, Interconnect pinout file Mechanical drawings, assembly files FPGA GHRD/GSRD Test Designs by interface (Quartus Prime Pro Edition 23.3) BMC Software API HPS Software: -- Built with Yocto Project version 4.1 (langdale) -- U-Boot bootloader (v2022.07), ATF Linux kernel (v5.15) and linux Poky distribution • 1-year technical support and warrantee • Online support at support.reflexces.com |
|
| Ordering Information | RXCAGF012PR24-SOM00I Availability: Samples Q1-2024 |
|
| MOTS = Modified version on request | R24C package compatible from 600KLE (AGF006) up to 2.7MLE (AGF027) Contact sales for customization |
|
Deliverables
Deliverables for the purchase of a System-on-Module:
- Ares Agilex™ 7 FPGA SoC F-Series module
- Active heatsink with heat spreader and fan
Ordering information: RXCAGF012PR24-SOM00I
Availability: Samples Q1-2024
Related products
Ares carrier board
The Ares Agilex™ 7 SoC F-Series system-on-module carrier board is an evaluation board with a FMC+ connector.
This evaluation Agilex™ 7 SoC F-Series board was designed to complement the reflex ces Module.
The target applications of our Agilex™ 7 SoC F-Series carrier board include bioscience, high-precision measurement, radar systems, satellite communication and electronic warfare.
The Ares carrier board is fully compatible with the Ares Module.
Achilles SoM
The Arria® 10 SoC SOM is based on the Intel® Arria® 10 SoC FPGA, and is available in three different versions according to the FPGA, memory, and connectors needed (see the “Tech Spec” tab).
Featuring an ARM dual-core Cortex-A9 MPCore and up to 660 KLEs of advanced low-power FPGA logic elements, the Arria® 10 SoC combines the flexibility and ease of programming of a CPU with the configurability and parallel processing power of an FPGA.
Its small size and its strong FPGA makes it perfectly suited to embedded and industrial markets.
Thanks to a system-on-chip (SoC) (an integrated circuit inside the FPGA, most often a CPU (central processing unit) processor), the FPGA can better control the board.
The target markets include automotives, video broadcasting, machine and intelligent vision, industry, military, testing and measurements, and medical.
The Arria® 10 SoC SOM is shipped alone.
This System On Module is also available in a Development Kit : The Achilles DevKit. This Arria ® 10 SoC development kit will provide you with schematics, reference designs and a starter board.
We also offer a PCIe Carrier Board as an optional extra product compatible with all reflex ces Arria® 10 SoC SOMs, or we can design a custom carrier board.