COMXpress Stratix® 10 SoC PCIe Carrier Board

Diagrams

Tech spec

Configuration and Monitoring

• 1x Micro USB (On board USB Blaster, UART over USB)

Communication Interfaces

• 1x Ethernet 10/100/1000 Base-T (HPS)
• 1x QSFP+ Optrical link for 10/40GbE protocols
• 2x Serial SATA revision 3.0, 6Gb/s
• 2 x MiniSAS quad connector (1 HD SAS, 4 SATA HDD, NVMe interface capable)
• 3x USB2.0 Type A (HPS)
• 1x USB3.0 OTG Type A
• SPI, SMB, I²C, UART and 8 GPIOs on header connectors
• 1x PCI Express x16 (Gen 1, 2 or 3)
• 1x eSPI interface multiplexed over Intel® Low Pin Count (LPC) Interface
• 1x Network Controller Sideband Interface (NC-SI) for host communication
• 1x RTC battery holder
• 1x Coax connector for PPS (pulse per second)
• PCIe evaluation board with PCIe bracket
• Schematics
• VHDL test designs (included top level)

Power supply

• 8-pin ATX Power supply connector with Oring protection

Operating Temperature :  -0°C / + 40°C

Board dimensions : full length 254mm x 111.15mm

Compliance

• Full compatible with COMXpressSX Stratix® 10 module
• RoHS/REACH compliant
• UL certified
• ISO9001 Facility

Deliverables

Board Content

• PCIe evaluation board with PCIe bracket
• Schematics
• Mechanical files (3D DWF/STEP models and 2D drawing) (upon request)
• VHDL test designs (included top level) - only with COMXpress Stratix®10 SoC module
• Linux BSP - only with COMXpress Stratix®10 SoC module

Ordering Information

Part number = RXCS10S0000F43-FHP00A