PCIe boards

The XpressVUP-LP9PT3 Virtex® Ultrascale+™ VU9P-3 FPGA PCIe board is a low-profile PCIe network processing FPGA board, optimized for HFT (high frequency trading) and Ultra low-latency.
The XpressVUP-LP9PT3 Virtex® Ultrascale+™ VU9P-3 FPGA PCIe board is based on an AMD Virtex® Ultrascale+™ VU9P-3 FPGA, with -3 speed grade.

The board provides 2 banks of DDR4, 2 banks of QDR2+ memories (2 chips of 288 Mbit for a 576 Mbit total of external QDR2+), and two QSFP28 cages for multi 10 GbE/40 GbE/100 GbE networking solutions.
The FPGA board is delivered with a dual slot active heatsink, and was specifically designed to optimize embedded applications.

This low-profile PCIe board is designed for computationally intensive applications, from HPC to finance and networking.

Advantages of using our Virtex® Ultrascale+™ VU9P-3 FPGA board in finance applications include high performance, low latency, and enhanced security. Fintech is a domain in which companies increasingly require the most innovative and high-end FPGA technologies for their key applications listed on the stock exchanges and the banks. Such FPGA boards enable financial institutions to accelerate computations, make faster trading decisions, and optimize their financial strategies, ultimately gaining a competitive edge in the dynamic world of finance.

For a different speed grade, check the XpressVUP-LP9PT Virtex® Ultrascale+™ VU9P FPGA PCIe board or the XpressVUP-LP5PT Virtex® Ultrascale+™ VU5P FPGA PCIe board.

The XpressSX AGI-FH400G Agilex™ I-Series SoC PCIe board is a full-height, half-length PCIe Gen5 Network Processing board, featuring the Agilex™ I-Series SoC FPGA and 400 GB Ethernet.

The Intel® Agilex™ board is based on an Intel® Agilex™ I-series SoC FPGA. This device is optimized for bandwidth-intensive applications that require a high-performance processor interface, supported by the CXL™ standard interface, the PCIe Gen5 x16 interface, and transceiver tiles with data rates of up to 116 Gbps.

The FPGA board is delivered with a 2-slot PCIe active heatsink and is specifically optimized for embedded applications.

Target markets are Security, SmartNIC, and Networking Acceleration.

REFLEX CES & CESNET collaborated to provide a complete solution for network security and monitoring, smart NIC, and networking acceleration applications, through the Liberouter project.

The XpressGX S10-FH800G Stratix® 10 GX board is a full-height profile PCIe Network Processing board, featuring the Intel® Stratix® 10 FPGA with support for up to 800 GB Ethernet.

The Stratix® 10 GX board is based on a Stratix® 10 GX FPGA. This device is optimized for PFGA applications that require high transceiver bandwidth and core fabric performance.

To optimize customer memory needs, the board offers on-board memory as well as external memory cards (DDR4 or QDRII type, or mixed memory).

The FPGA board is delivered with a 1-slot PCIe passive heatsink, and is specifically optimized for embedded applications.

Target markets include data centers and cloud computing, security, high-performance computing, military and defense, broadcasting and video.

A 100G Ethernet packet processing Reference Design, developed for the XpressGX S10-FH800G PCIe board, is available. Discover our video to know more.

The reflex ces Toolkit is provided with the XpressGX S10-FH800G board.

The XpressGX S10-FH201G is a full-height PCIe Network Processing board, featuring the Intel® Stratix® 10 FPGA with support for up to 200 GB Ethernet.

The Stratix® 10 GX 2800 PCIe board is based on a Stratix® 10 GX FPGA. This device is optimized for FPGA applications that require high transceiver bandwidth and core fabric performance.

The FPGA board is delivered with a 1-slot PCI-Express passive heatsink, and is specifically optimized for embedded applications.

To optimize customer memory needs, the board offers on-board and external memory (DDR4 and QDRII type). A customizable QDR2+ Xtrem RDIMM can be developed.

Target markets include data centers and cloud computing, finance, high-performance computing, military and defense, broadcasting and video.

The Stratix® 10 GX development kit is based on an Intel® Stratix® 10 GX 2800 KLEs FPGA. It comes as a getting-started package, including a Stratix® 10 GX PCIe board, and all the schematics and reference designs needed to start working on the board.

Featuring a PCIe Gen3 x16, one FMC+ connector and GPIO and XCVR extension connectors, the Stratix® 10 GX development kit provides developers with the best out-of-the box experience and best-in class compact hardware platform.

The Stratix® 10 GX FPGA device is optimized for PFGA applications that require high transceiver bandwidth and core fabric performance.

The FPGA board is delivered with a 2-slot PCI-Express active heatsink, and is specifically optimized for acceleration and embedded applications.

Target markets include high-performance computing and IP and ASIC prototyping.

The XpressGXA10-LP1150T is a low-profile Arria® 10 GX PCIe network processing FPGA board featuring 80 GB Ethernet, which provides customers with an off-the-shelf best-in class hardware solution for HPC or networking applications.

The Arria® 10 GX 1150 PCIe board is based on an Arria® 10 GX 1150 FPGA. This device is optimized for FPGA applications that require high transceiver bandwidth and core fabric performance.

The board hosts 1 bank of DDR4 and 4 banks of QDR2+ memories and two QSFP+ cages for multi 10 GbE/40 GbE networking solutions.

The FPGA board is delivered with a PCIe low-profile or standard bracket, and was specifically designed for optimizing embedded applications.

This low-profile PCIe board is designed for ultra-low latency applications. Target markets include finance, acceleration, data centers, networking, and security.

The XpressGXA10-LP1151B is based on the Intel® Arria® 10 GX 1150 KLE FPGA. This Arria® 10 GX PCIe board is a low-profile PCIe network processing FPGA board featuring 40 GB ethernet.

The board is based on an Arria® 10 GX FPGA. This FPGA increases productivity while decreasing time to market. It is also optimized for FPGA applications that require high transceiver bandwidth and core fabric performance. With its small form factor and its single slot passive heatsink, this low-profile PCIe board plugs into PCI-Express slots and is optimized for your embedded systems.

The Arria® 10 GX PCIe board is programmable, thanks to its complete development environment (FGPA design and HDL, hardware and software, firmware).

The target applications include fog computing, finance, acceleration, networking, and security.

The XpressVUP-LP5P is based on a Virtex® Ultrascale+™ VU5P FPGA. This Virtex® Ultrascale+™ VU5P FPGA PCIe board is a low-profile PCIe network processing FPGA board.
The Virtex® Ultrascale+™ VU5P FPGA provides the highest performance and integration capabilities in a 14 nm/16 nm FinFET node. As the industry’s most capable FPGA family, this device is ideal for computationally intensive applications.
The board provides 2 banks of DDR4, 2 banks of QDR2+ memories, and two QSFP28 cages for multi 10 GbE/40 GbE/100 GbE networking solutions.
The FPGA board is delivered with a PCIe standard or low-profile bracket. The Virtex® Ultrascale+™ VU5P FPGA PCIe board was specifically designed to optimize embedded applications.
This low-profile PCIe board is designed for acceleration, data centers, networking, and security applications.

If additional System Logic Cells are required, check the XpressVUP-LP9P Virtex® Ultrascale+™ VU9P FPGA PCIe board.

The XpressVUP-LP9PT Virtex® Ultrascale+™ VU9P FPGA PCIe board is a low-profile PCIe network processing FPGA board.
The XpressVUP-LP9PT Virtex® Ultrascale+™ VU9P FPGA PCIe board is based on a AMD Virtex® Ultrascale+™ VU9P FPGA. The device provides the highest performance and integration capabilities in a 14 nm/16 nm FinFET node.
The board provides 2 banks of DDR4, 2 banks of QDR2+ memories, and two QSFP28 cages for multi 10 GbE/40 GbE/100 GbE networking solutions.
The FPGA board is delivered with a PCIe standard or low-profile bracket, and was specifically designed to optimize embedded applications.
This low-profile PCIe board is designed for computationally intensive applications, from HPC to networking.

If you are looking for fewer System Logic Cells, check the XpressVUP-LP5P Virtex® Ultrascale+™ VU5P FPGA PCIe board.